ACM-4200 ACTi Megapixel IP Cube Camera

Specifications:

• Model Number - ACM-4200
• Device - Micron Progressive Scan CMOS
• Size - 1/3 inch
• Effective Pixels - 1280 x 1024
• Min. Scene Illumination - 0.5 Lux at F1.8 (30 IRE,MAX AGC)
• Lens - f 4.2 mm / F1.8
• Viewing Angle - 75� (Horizontal)
• Sync. System - Internal
• Motion Detection - Yes (3 windows)
• Electronic shutter - 1/10 ~ 1/2,000 sec. (60 Hz) / 1/10 ~ 1/2,000 sec. (50 Hz)
• Flickerless - 1/120 sec. (60 Hz) / 1/100 sec. (50 Hz)
• BLC - Yes
• AGC - Automatic (User defined)
• White Balance - 6 modes (AUTO, INDOOR1, INDOOR2, OUTDOOR1, OUTDOOR2, HOLD CURRENT, MANUAL) configurable
• S/N Ratio - Better than 44 dB
• Compression - MPEG-4 SP / MJPEG
• Picture Resolution - SXGA (1280x1024). HD 720 (1280x720). VGA (640x480).
• Image Frame Rate - 8 fps at SXGA. 10 fps at HD720. 30 fps at VGA.
• Compression - 8 kHz, Mono, PCM
• Built-in Microphone - Sensitivity: -36�3dB(0dB=1V/Pa); S/N Ratio: more than 58 dB; Directivity: Omni-directional.
• Compression - 8 kHz, Mono, PCM
• Audio Line Output - Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Phone Jack
• Reset Button - Factory default
• LED - System status
• Ethernet - Ethernet(10/100 Base-T), RJ-45 connector
• Protocol - TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP, SMTP, DNS, DDNS, NTP, ICMP, IGMP, ARP, 3GPP
• Web Browser - Microsoft Internet Explorer 6.0 or above
• SDK - ACTi SDK-10000
• Security - Password protection: configured by the administrator
• Temperature - 0 �C ~ 40 �C (32 �F ~ 104 �F)
• Power Requirement - DC 3.3 V �10%
• Power Consumption - 2.4 W
• Dimensions (WxHxD) - 88 mm x 85 mm x 52.1 mm (3.46� x 3.35� x 2.05�)
• Weight - 150 g (0.33 lb), w/o bracket