TriStar Security Products
My Account: Log In

0 item(s) in cart/ total: $0 view cart
Indoor Cameras
Outdoor Cameras
PTZ Cameras
LPR Cameras
DVR & NVR
Video Encoders
PoE Switches
Accessories
Monthly Special
Free Shipping!

ACTi
ArecontVision
AVerMedia
AVTECH
Axis
DiViS
Exacq
GeoVision
IQeye
Messoa
NUUO
Planet
QNAP
Samsung
Sony
StarDot
Veracity
Vivotek



 

Home > Accessories

Veracity VHW-HWPO Highwire Ethernet over Coax Converter with PoE

Model # VHW-HWPO
Veracity VHW-HWPO Highwire Ethernet over Coax Converter with PoE
Email a friend Email a friend
Questions about this item? Be the first to ask here. Questions about this item? Be the first to ask here.
Price
Your Price:  
$208.00
Availability:
In Stock
Quantity
- or -
Add to Wish List
Description

Product Highlights

  • Coax to Ethernet with Universal PoE
  • High-speed Network Connection
  • No Configuration / Setup Required
  • Transparent to the Network
  • Sensed on Connection
  • No MAC / IP Address Required
  • Auto-optimizing 75 ohm Coaxial Cables
  • Long Connection Range
  • Universal Power Input

The Veracity Highwire Ethernet over Coax Converter with PoE converts existing video infrastructure into a fast network connection. For IP cameras and mega-pixel cameras, it turns the legacy 12V or 24V power into a universal Power over Ethernet (PoE) supply. Using the converter, you can utilize old analog cabling without installing extra power for the new cameras.

Speed, duplex, and crossover are sensed on connection of the Highwire Ethernet over Coax Converter with PoE, thus requiring no setup. No configuration is required when you connect the IP camera and a regular Highwire at the other end of the cable, as the link will be established automatically. Using universal IEEE 802.3af standard, the Highwire PoE can not only detect power but also enable it for IP cameras, with up to 6.5W for Power Class 1 or 2 devices.

The connection of the Ethernet over Coax Converter with PoE is invisible to Ethernet data, and does not need a MAC or IP address. Besides auto-optimizing for all 75 ohm coaxial cables, the long connection range of the converter makes it suitable for network connections beyond 328' (100m).

Featuring a universal power input, the Highwire Ethernet over Coax Converter is ideal for low-voltage installations and can also be used on legacy coaxial cables. Compared to Cat5 cables, the coaxial cables coil and bend appropriately, making the converter apt for allowing network access to elevator carriages, VoIP, security, lift panel, and other devices.

Converts existing video infrastructure into a fast network connection

For IP cameras and mega-pixel cameras

Turns legacy 12V or 24V power into universal Power over Ethernet (PoE) supply

Allows to replace old analog cabling without installing extra power for the new cameras

Speed, duplex, and crossover are sensed on connection

Automatically detects and enables power to IP cameras using the universal IEEE 802.3af

Up to 6.5W for Power Class 1 or 2 devices

No need for MAC or IP address

Invisible to Ethernet data

Auto-optimizing for all 75 ohm coaxial cables

Long connection range of up to 1650' (500m) of RG-11 cable, or 930' (280m) of CCTV-grade RG-59 cable

Suitable for network connections beyond 328' (100m)

Universal power input

Ideal for low-voltage installations; can be used on legacy coaxial cables

Coaxial cables coil and bend appropriately compared to Cat5 cables - converter apt for allowing network access to elevator carriages, VoIP, security, lift panel and other devices

No modification needed when used with 50 ohm coax or cables of other impedance

Optional wall-mounting brackets and a rack-mounting kit

Interface

Connector type: BNC 75ohm

Cable impedance: 75ohm (RG59 or similar)

Cable length max: Up to (820' (250m) for full data rate (or up to 1148'/350m at reduced rate)

Data throughput max: 200Mbps (total up + down). Auto-adaptation to cable conditions

Ethernet

Connector type: RJ45

Cable type: Straight through or cross-over, auto detected

Rates supported: 100BaseT / 10BaseT, full/half duplex with auto negotiation

Indicators

Green - Constant: Power OK, Full HIGHWIRE data link
Green - Slow: Power OK, Auto-adapted HIGHWIRE data link
Green - Blink: Power OK, no HIGHWIRE link
Green - Off: No power
Amber - Constant: Ethernet link On
Amber - Blink: Network traffic

PoE

(PoE out)
IEEE 802.3af compliant PSE
Max power out 7W, isolated
Max device power 6.49W
(Power class 1 or 2 devices only)

Power

Connector type: Screw terminals with detachable plug

Power supply type: IEC Class II isolated only

Operating voltage: Nominal 12V DC (9-24V working range) or 24V AC (type and polarity auto detected)

Supply current: 200mA (12V), 100mA (24V)

Environment

Operating temp.: 14 ~ 122°F (-10 ~ 50ēC)

Relative humidity: 85% non-condensing

Grounding: Chassis should be grounded and is connected to the BNC shield.

Dimensions (LxWxH)

3.3 x 2.1 x 1" (83 x 54 x 23mm)
With Connector: 4 x 2.1 x 1" (104 x 54 x 24mm)

Weight

3.9 oz (110g)

 

Related Items
AVTech AVX912A Kit Ethernet Over Coax Converter for IP Network Cameras
AVTech AVX912A Kit Ethernet Over Coax Converter for IP Network Cameras
Your Price: $128.00
AXIS H.264 +AAC Decoder 50-User Decoder License Pack Software
AXIS H.264 +AAC Decoder 50-User Decoder License Pack Software
Your Price: $54.00
Arecont Vision MD-FMA Flush Mount
Arecont Vision MD-FMA Flush Mount
Your Price: $57.00
Arecont Vision MD-JBA Junction Box Adaptor
Arecont Vision MD-JBA Junction Box Adaptor
Your Price: $56.00
Axis 3/4 Inch NPS Conduit Adapter for AXIS P33-VE Cameras (4 Pack)
Axis 3/4 Inch NPS Conduit Adapter for AXIS P33-VE Cameras (4 Pack)
Your Price: $132.00
Axis Communications T94B01S Mount Brackets (White 10-Pack)
Axis Communications T94B01S Mount Brackets (White 10-Pack)
Recently Viewed Items
Browse Similar Items