(0) Item Hello, Guest
Planet 8-Port WGSD-10020HP SFP Managed 802.3at PoE Switch

Planet 8-Port WGSD-10020HP SFP Managed 802.3at PoE Switch

Your Price: $344.00
In Stock
Model #:WGSD-10020HP

Centralized Power Management for Gigabit Ethernet Networking
To fulfill the demand of higher power required PoE network applications with Gigabit speed transmission, PLANET introduces new high PoE, desktop 13-inch size Gigabit Managed Switch – WGSD-10020HP which features high performance Gigabit IEEE 802.3af PoE (Up to 15.4W) and IEEE 802.3at PoE Plus (Up to 30.8W) on all ports. A maximum of 30.8 Watts is available on each Gigabit ports of the WGSD-10020HP for powering per PD, with a maximum PoE delivery of 150 Watts for all ports in order to satisfy the increasing needs of power consumption by PDs. Providing Gigabit throughput and high power supply, the WGSD-10020HP optimizes the installation and power management of network devices such as 11n wireless access points (AP) with Gigabit PoE LAN port, security PTZ / Speed Dome network video camera, large screen PoE Video phones, thin-clients and etc.



Intelligent Powered Device Alive Check
The WGSD-10020HP PoE Gigabit Managed Switch can be configured to monitor connected PD (Powered Device) status in real-time via ping action. Once the PD stops working and no response, the WGSD-10020HP will recycle the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reduce administrator management burden.



PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contribution to environment protection on the earth, the WGSD-10020HP can effectively control the power supply along with its capability of giving high watts power over Ethernet. The “PoE schedule” function enables you to activate or inactivate PoE power feeding for each PoE port during specified time intervals, which is a powerful function to help SMB or Enterprise save power and money.



Cost-effective IPv6 Managed Gigabit Switch Solution for SMB 
To fulfill the demand of IPv6 (Internet Protocol version 6) network infrastructure, the WGSD-10020HP supports both IPv4 and IPv6 management functions. It can work with original IPv4 network structure and also support the IPv6 network structure in the future. With plenty of management functions designed in easy and friendly management interfaces, the WGSD-10020HP is the best choice for ISPs to build the IPv6 FTTx edge service and for SMB to connect with IPv6 network.

Diversity for Multiple Applications
The WGSD-10020HP is a desktop size Layer 2 / Layer 4 Full Managed Gigabit Switch which can handle extremely large amounts of data in a secure topology linking to an Enterprise backbone or high capacity network server with 20Gbps switching fabric. The powerful features of QoS and network security offered by the WGSD-10020HP provides effective data traffic control for ISPs and Enterprises VoIP, video streaming and multicast applications. It is ideal for the remote access layer of campus and enterprise networks, and the aggregation layer of IP metropolitan networks.

Robust Layer 2 Features
The WGSD-10020HP can be programmed for advanced switch management functions such as dynamic Port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD Snooping. The WGSD-10020HP provides 802.1Q Tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the WGSD-10020HP allows the operation of a high-speed trunk combining multiple ports. It enables maximum up to 5 groups of 10 ports for trunk and supports fail-over as well. 

Enhanced Security
PLANET WGSD-10020HP offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP / UDP ports or defined typical network applications. Its protection mechanism also comprises of 802.1x Port-Based and MAC-Baseduser and device authentication. With the private VLANfunction, communication between edge ports can be prevented to ensure user privacy. The WGSD-10020HP also provides Network Security functions including DHCP Snooping, IP Source Guard and Dynamic ARP Inspection to prevent IP snooping attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly secured corporate networks with considerably less time and effort than before.

Excellent Traffic Control
The WGSD-10020HP is loaded with powerful traffic management and QoS features to enhance services offered by telecoms. The QoS features includes wire-speed Layer 4 traffic classifiers and bandwidth limiting that are particular useful for multi-tenant unit, multi business unit, Telco, or Network Service Provider applications. The WGSD-10020HP also empowers the enterprises to take full advantages of the limited network resources and guarantees the best performance in VoIP and Video conferencing transmission.

Efficient and Secure Management
For efficient management, the WGSD-10020HP Managed Ethernet Switch is equipped with console, WEB and SNMP management interfaces. With the built-in Web-Based management interface, the WGSD-10020HP offers an easy-to-use, platform-independent management and configuration facility. The WGSD-10020HP supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the WGSD-10020HP can be accessed via Telnet and the console port. Moreover, the WGSD-10020HP offers secure remote management by supporting SSH, SSL and SNMPv3connection which encrypt the packet content at each session.

Flexibility and Extension Solution
The two mini-GBIC slots built in the WGSD-10020HP support Dual-Speed, 100Base-FX and 1000Base-SX/LXSFP (Small Form-factor Pluggable) fiber-optic modules, that means, the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance or the transmission speed required. The distance can be extended from 550 meters (Multi-Mode fiber) up to above 10/20/30/40/50/60/70/120 kilometers (Single-Mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

High Power IP Surveillance and Wireless LAN Service in Public Transportation
Applying the capability of IEEE 802.3at Power over Ethernet standard, the WGSD-10020HP can directly connect with any IEEE 802.3at end-node like PTZ (Pan, Tilt & Zoom) network cameras, Speed Dome IP cameras, color touch- screen Voice over IP (VoIP) telephones, and multi- channel wireless LAN access points. Besides the wired Internet network, the WGSD-10020HP enables the wireless LAN deployment more efficient for the transportation stations to bring high-speed Internet services in wide areas. By adopting PoE Wireless LAN structure, the transportation authority gains benefits from less cost while providing better Internet services in wider areas for the travelers.



VoIP Network in IP Office
With the business office expansion, the additional telephones required could be installed in less cost via the implementation of PoE IP Telephony system than that of the traditional circuit wiring telephony system. PLANET WGSD-10020HP 802.3at Desktop PoE Switch that backward compatible with 802.3af helps enterprises to create an integrated data, voice, and powered network. PLANET 802.3af / 802.3at compliant IP Phones and Analog Telephony Adapter can be installed without additional power cable because the power can be provided via the standard Ethernet cable from the connected WGSD-10020HP. With the WGSD-10020HP, IP Telephony deployment becomes more reliable and cost effective, which helps enterprises save tremendous cost when upgrading from the traditional telephony system to IP Telephony communications infrastructure.


Physical Port
  •8-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 with IEEE 802.3af / 802.3at PoE Injector
  •2 100/1000Base-X mini-GBIC/SFP slots, SFP type auto detection
  •RS-232 DB9 console interface for basic management and setup

Power over Ethernet 
  •Complies with IEEE 802.3af Power over Ethernet End-Span PSE
  •Complies with IEEE 802.3at high-power Power over Ethernet End-Span PSE
  •Up to 8 ports for IEEE 802.3af / 802.3at devices powered
  •Supports PoE Power up to 30.8 Watts for each PoE ports
  •Auto detect powered device (PD)
  •Circuit protection prevent power interference between ports
  •Remote power feeding up to 100m
  •PoE Management
  •Total PoE power budget control
  •Per port PoE function enable / disable
  •Pert port PoE function enable / disable
  •PoE Port Power feeding priority
  •Per PoE port power limit
  •PD classification detection
  •PD Alive check

Layer 2 Features
  •Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control 
  •High performance of Store-and-Forward architecture and run/CRC filtering eliminate erroneous 
  packets to optimize the network bandwidth
  •Storm Control support
   –Multicast / Unknown-Unicast / Broadcast
  •Supports VLAN
   –IEEE 802.1Q Tagged VLAN
   –Up to 256 VLANs groups, out of 4095 VLAN IDs
   –Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) 
   –Private VLAN Edge (PVE)
   –Protocol-Based VLAN
   –MAC-Based VLAN
   –Voice VLAN
  •Supports Spanning Tree Protocol
   –STP, IEEE 802.1D Spanning Tree Protocol
   –RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
   –MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
   –BPDU Guard
  •Supports Link Aggregation
   –802.3ad Link Aggregation Control Protocol (LACP)
   –Cisco ether-channel (Static Trunk)
   –Maximum 5 trunk groups, up to 10 ports per trunk group 
   –Up to 20Gbps bandwidth (Duplex Mode)
  •Provides Port Mirror (many-to-1)
  •Port Mirroring to monitor the incoming or outgoing traffic on a particular port 

Quality of Service
  •Ingress Shaper and Egress Rate Limit per port bandwidth control
  •8 priority queues on all switch ports
  •Traffic classification
   –IEEE 802.1p CoS
   –IP TOS / DSCP / IP Precedence
   –IP TCP / UDP port number
   –Typical network application
  •Strict priority and Weighted Round Robin (WRR) CoS policies
  •Supports QoS and In/Out bandwidth control on each port
  •Traffic-policing policies on the switch port
  •DSCP remarking 

  •Supports IGMP Snooping v1, v2 and v3
  •Supports MLD Snooping v1 and v2
  •Querier mode support
  •IGMP Snooping port filtering
  •MLD Snooping port filtering
  •MVR (Multicast VLAN Registration)

  •IEEE 802.1x Port-Based / MAC-Based network access authentication
  •Built-in RADIUS client to co-operate with the RADIUS servers
  •TACACS+ login users access authentication
  •RADIUS / TACACS+ users access authentication
  •IP-Based Access Control List (ACL)
  •MAC-Based Access Control List
  •Source MAC / IP address binding
  •DHCP Snooping to filter untrusted DHCP messages
  •Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  •IP Source Guard prevents IP spoofing attacks
  •Auto DoS rule to defend DoS attack
  •IP address access management to prevent unauthorized intruder

  •Switch Management Interfaces
   –Console / Telnet Command Line Interface 
   –Web switch management
   –SNMP v1, v2c, and v3 switch management
   –SSH / SSL secure access
  •Four RMON groups (history, statistics, alarms, and events) 
  •IPv6 IP Address / NTP / DNS management
  •Built-in Trivial File Transfer Protocol (TFTP) client
  •BOOTP and DHCP for IP address assignment
  •Firmware upload / download via HTTP / TFTP
  •DHCP Relay
  •DHCP Option 82
  •User privilege levels control
  •Network Time Protocol (NTP)
  •Link Layer Discovery Protocol (LLDP) 
  •Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
  •Reset button for system reboot or reset to factory default
  •PLANET Smart Discovery Utility for deploy management

Hardware Specification

Hardware Version


Copper Ports

8 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports

SFP/mini-GBIC Slots

2 1000Base-SX/LX/BX SFP interfaces (Port-9 and Port-10)
Compatible with 100Base-FX SFP

Console Port

1 x RS-232 DB9 serial port (115200, 8, N, 1)

Switch Architecture


Switch Fabric

20Gbps / non-blocking



Address Table

8K entries, automatic source address learning and ageing

Share Data Buffer

1392 kilobytes

Flow Control

IEEE 802.3x Pause Frame for Full-Duplex
Back pressure for Half-Duplex

Jumbo Frame


Reset Button

< 5 seconds: System reboot
> 5 seconds: Factory Default

Dimension (W x D x H)

330 x 155 x 43.5 mm, 1U high




Power, FAN Alert, 
Link/Act per Gigabit port, 
PoE In-Use for Port-1~ 8

Power Consumption

Max. 172.9 Watts / 589.6 BTU

Power Requirement

AC 100~240V, 50/60Hz

Power over Ethernet

PoE Standard

IEEE 802.3af / at PoE / PSE

PoE Power Supply Type


PoE Power Output

Per Port 56V DC 
Max. 30.8 Watts

Power Pin Assignment

1/2(+), 3/6(-)

PoE Power Budget

150 Watts maximum

PoE Ability

Number of PD @ 7 Watts: 8
Number of PD @ 15.4 Watts: 8
Number of PD @ 30.8 Watts: 4

Layer 2 Function

Basic Management Interfaces

Console, Telnet, Web Browser, SNMPv1, v2c

Secure Management Interface


Port Configuration

Port disable / enable 
Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection 
Flow Control disable / enable 
Bandwidth control on each port
Power saving mode control

Port Status

Display each port’s speed duplex mode, link status, Flow control status,Auto negotiation status, trunk status

Port Mirroring

TX / RX / Both
Many to 1 monitor


802.1Q Tagged Based VLAN, up to 256 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
Protocol-Based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 256 VLAN groups, out of 4096 VLAN IDs

Link Aggregation

IEEE 802.3ad LACP / Static Trunk
5 groups of 10-Port trunk support


Traffic classification based, Strict priority and WRR
8-level priority for switching
 - Port Number 
 - 802.1p priority
 - 802.1Q VLAN tag
 - DSCP/TOS field in IP Packet

IGMP Snooping

IGMP (v1/v2/v3) Snooping, up to 255 multicast Groups
IGMP Querier mode support

MLD Snooping

MLD (v1/v2) Snooping, up to 255 multicast Groups
MLD Querier mode support

Access Control List

IP-Based ACL / MAC-Based ACL
Up to 123 entries

Bandwidth Control

Per port bandwidth control
Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps


RFC-1493 Bridge MIB
RFC-1643 Ethernet MIB
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-2737 Entity MIB
RFC-2618 RADIUS Client MIB
RFC-3411 SNMP-Frameworks-MIB 

Standards Conformance

Regulation Compliance

FCC Part 15 Class A, CE

Standards Compliance

IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000Base-T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1D Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1s Multiple spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet plus
RFC 791 IP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
FRC 3810 MLD version 2

Recently Viewed Items