Easy PoE Network Deployment
The PLANET POE-1200P2 is 12-Port IEEE 802.3af Power over Ethernet Web
Management injector Hub and complies with IEEE 802.3, IEEE 802.3u and
IEEE 802.3af standards. With 12 10/100Base-TX Fast Ethernet ports,
POE-1200P2 support full 48V DC power for any remote IEEE 802.3af powered
device (PD) like Wireless LAN Access Point, IP phone, and IP Camera.
Supporting PoE power budget of 190 watts, POE-1200P2 provides sufficient
15.4 watts PoE power to 12 remote PD devices.
Easy Cabling Installation
The POE-1200P2 is installed between a regular Ethernet Switch and the
powered devices, injecting power without affecting the data
transmission. They offer a cost effective and quick solution to upgrade
network system to IEEE 802.3af Power over Ethernet system without
replacing the existing Ethernet switch. There are 24 RJ-45 STP ports on
the front panel of PoE Injector Hub, in which the 12 ports on the lower
stack function as "Data input" and the other 12 ports on the upper stack
function as "PoE (Data and Power) output". Each of the "PoE output" port
on the upper stack operates as a power injector which transmits DC
Voltage to the CAT 5 cable to transfer data and power simultaneously
between the Injector and Splitter.
Friendly / Simple Web Management Interface
To efficiently manage the powered devices, POE-1200P2 provide Web
management interface in which administrators can use the functions
including port Enable / Disable, port priority, system configuration,
and Username / Password changing and with smart features for powered
device. The PoE injector Hub can auto detect the power status of each
port and show massages on its Web management interface. These features
also provide a cost-effective way to manage the device via from Internet
whenever you are at work or at home.