(0) Item Hello, Guest
Planet FNSW-2400PS 24-Port 10/100 Web/Smart Ethernet POE Switch

Planet FNSW-2400PS 24-Port 10/100 Web/Smart Ethernet POE Switch

Your Price: $330.00
In Stock
Model #:FNSW-2400PS

Cost-effective Edge Network Connection Solution 
To provide enhanced network management with cost saving benefit to customers, PLANET releases the new version of the FNSW-2400PS, the Layer 2 Web Smart Switch with PoE injector function. The FNSW-2400PS is equipped with 24 Fast Ethernet ports integrating with PoE injector function. With 125Watts PoE power budget, it provides a compact, affordable, safe and reliable power solution for small to medium enterprises.

IEEE 802.3af Power over Ethernet Support
The PoE in-line power following the IEEE 802.3af standard makes the FNSW-2400PS able to deliver power to 24 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire. It optimizes the installation and safe power management of network devices such as wireless access points (AP), Voice over IP(VoIP) phones and IP Surveillance cameras.With more efficient switching power supply, the efficiency of the FNSW-2400PS would be much better than four linear power adapters in a long run and bring customers the key benefit – energy saving.

Easy Cabling Installation
The Power over Ethernet technology enables the Ethernet wire to carry both data and power. With data and power over Ethernet from one unit, the FNSW-2400PS shall reduce cable installation and eliminate the need for extension cords or dedicated electrical outlets on the wall, ceiling or any unreachable place. In all, it lowers the installation costs and simplifies the deployment effort. 

Friendly Web-Based Management
For efficient management, the FNSW-2400PS is equipped with remote Web interface. It can be programmed for advanced switch management functions such as port configuration, VLAN, Rapid Spanning Tree Protocol (RSTP), IGMP Snooping, port trunk, QoS, bandwidth control, and MAC address / TCP & UDP filter. The FNSW-2400PS provides Port-Based / IEEE 802.1Q / MTU VLAN (port based / IEEE 802.1Q VLAN including overlapping). The VLAN groups allowed on the FNSW-2400PS will be maximally up to 24 for port based or up to 32 for IEEE 802.1Q VLAN groups. On the other hand, the MTU VLAN divides port 1 to port 24 as separate LAN group. Via supporting port trunking, the FNSW-2400PS allows the operation of a high-speed trunk combining multiple ports. The FNSW-2400PS also provides two groups of up to 4-Port 10/ 100Base-TX trunk support with up to 800Mbps bandwidth per trunk group.

Department / Workgroup PoE Switch
With 24 10/100Mbps ports, the FNSW-2400PS provides a cost-effective and high-performance solution for power users. With its 4.8 Gigabits per second, non-blocking switch fabric, this device can easily provide a local, high bandwidth Fast Ethernet network for your departmental backbone. Providing up to 125Watts PoE budget, in-line power interface, the FNSW-2400PS helps the administrator to flexibly build a power central-controlled IP phone system, IP Camera system, AP group for the enterprise. For instance, 24 cameras or wireless APs can be installed around the corner in the company for surveillance or wireless roaming demands. Without the power-socket limitation, the FNSW-2400PS makes the installation of cameras and Wireless LAN AP more efficiently.


Physical Port
• 24-Port 10/100Mbps Fast Ethernet ports with PoE Injector
• Reset button for system management

Power over Ethernet
• Complies with IEEE 802.3af Power over Ethernet Mid-Span PSE
• Up to 24 IEEE 802.3af devices powered
• Supports PoE Power up to 15.4 Watts for each 802.3af PoE port
• Auto detect powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m

Layer 2 Features
• Auto-MDI / MDI-X detection on each RJ-45 port
• Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE Frame Flow control (Full-Duplex)
• Supports VLAN:
 –IEEE 802.1Q Tag-Based VLAN
 –Port-Based VLAN
 –MTU VLAN (Multi-Tenant Unit VLAN)
• Supports Link Aggregation
 –up to 2 trunk groups
 –up to 4 Fast Ethernet ports per trunk group
 –IEEE 802.3ad LACP (Link Aggregation Control Protocol)
• Supports Spanning Tree Protocol
 –STP, IEEE 802.1D (Classic Spanning Tree Protocol)
 –RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
 –Loopback Detection
• Port Mirroring to monitor the incoming or outgoing traffic on a particular port

Quality of Service
• 2 priority queues on all switch ports
• Traffic classification:
 –Port-Based priority
 –IEEE 802.1p based priority 
 –IP TOS / DSCP based priority
 –TCP / UDP Port-Based QoS
• Strict priority and Weighted Round Robin (WRR) CoS policies
• In/Out rate limit control on each port
• Broadcast Storm Control support

• Supports IGMP Snooping v1 and v2

• MAC address filter
• TCP & UDP filter on each port
• Management idle time security

• Remote Web interface for Switch management and setup
• Supports SNMP v1
• Supports DHCP Option 82 and DHCP Relay
• Firmware upgrade through Web interface
• Configuration upload / download through Web interface
• Reset button for system reboot or reset to factory default

Hardware Specification


24 10/100Base-TX RJ-45 Auto-MDI/MDI-X interfaces

Switch Processing Scheme


Throughput (packet per second)


Switch Fabric


Address Table

8K entries

Share Data Buffer

1.75Mb embedded memory for packet buffers

Flow Control

Back pressure for Half Duplex, IEEE 802.3x Pause Frame for Full Duplex

Dimension (W x D x H)

445 x 207 x 45 mm (1U height)



Power Requirement

100~240V AC, 50-60 Hz, 2A

Power Consumption / Dissipation

Max.135 Watts / 460 BTU

Smart Function

System Configuration

Web interface, SNMP v1

Port Configuration

Port Speed Duplex mode selection
Port Disable / Enable

Bandwidth Control


Broadcast Storm Control


Port Statistics

Display each port’s detail Ethernet traffic counter information


24 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN

Spanning Tree Protocol

STP, IEEE 802.1D (Spanning Tree Protocol)
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)

Port Trunking

2 groups of 4-Port 10/ 100Base-TX trunk support, up to 800Mbps bandwidth per trunk group

Port Mirroring

Port mirroring allows monitoring of the traffic across any port in real time


Allows to assign low / high priority on each port
First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy

MAC Address / TCP & UDP Filter


IGMP Snooping v1 / v2

Allows to Disable or Enable

Power over Ethernet

PoE Standard

IEEE 802.3af Power over Ethernet / PSE

PoE Power Supply Type


PoE Power output

Per Port 48V DC, 350mA . Max. 15.4Watts

Power Pin Assignment

4/5(-), 7/8(+)

PoE Power Budget


Standards Conformance

Regulation Compliance

FCC Part 15 Class A, CE

Standards Compliance

IEEE 802.3 Ethernet 
IEEE 802.3u Fast Ethernet
IEEE 802.3af Power over Ethernet (15.4Watts)
IEEE 802.3x Full-Duplex flow control
IEEE 802.1p QoS
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol



Operating: 0~50 Degree C
Storage: -10~70 Degree C


Operating: 5~95%
Storage: 5~95% (Non-condensing)



Recently Viewed Items