(0) Item Hello, Guest
Planet FGSD-1022HP 8-Port 10/100Mbps Combo Managed 802.3at PoE Switch

Planet FGSD-1022HP 8-Port 10/100Mbps Combo Managed 802.3at PoE Switch

Your Price: $330.00
In Stock
Model #:FGSD-1022HP

High Power PoE for Security and Public Service PoE Applications

PLANET FGSD-1022HP, the next generation Managed PoE Switch, features IEEE 802.3af and High Power IEEE 802.3at Power over Ethernet (PoE) that combines up to 30 watts power output and data per port over one CAT 5E/6 Ethernet cable. It is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / Speed Dome network cameras, multi- channel (802.11a / b / g / n) wireless LAN access points and other network devices by providing double PoE power than conventional 802.3af PoE currently.

Flexible and Centralized Power Management

The 8 PoE ports in the FGSD-1022HP support both 802.3af and 802.3at PoE standards and allows users flexibly connect standard and high powered devices simultaneously. By offering 150 watts PoE budget, eight 15.4 watts IEEE 802.3af devices or five 30 watts IEEE 802.3at devices can be easily installed without the power-socket limitation. 
To facilitate power management, the FGSD-1022HP is implemented powerful PoE management features such asover temperature protection, usage threshold alert and auto power allocate to prevent power budget overloading. The PoE power budget can be allocated by priorities or classification and sent alert event logs when power usage reaches the defined threshold. The FGSD-1022HP enables centralization of the power supply and optimizes the installation and power management of remote network devices; therefore, it eliminates costs for additional AC wiring and reduces installation time.

IEEE 802.3at Power over Ethernet Pre-Standard Compliant

Till today, the IEEE 802.3af Power over Ethernet Standard has become popular yet the PoE demand still grows for increasing network-powered applications. With many critical applications appears, the IEEE 802.3af PoE standard may not afford the trend of higher power demand. Hence, the IEEE 802.3at Power over Ethernet pre-standard is defined to allow delivery of maximum up to 30 Watts input power to per PoE device. The IEEE 802.3at Power over Ethernet pre-standard is an ideal solution to fulfill the high power requirements directly via the RJ-45 Port interface. Compliant with IEEE 802.3at, the FGSD-1022HP possesses stronger power capability than the existing 802.3af PoE Switch.

Full-Functioned / Robust Layer 2 Features

The FGSD-1022HP can be programmed for basic switch management functions such as port speed configuration, Port aggregation, VLAN, Spanning Tree protocol, QoS, bandwidth control and IGMP Snooping. It provides IEEE 802.1Q Tagged VLAN and the VLAN groups allowed on the FGSD-1022HP will be maximally up to 256. Via aggregation of supporting port, the FGSD-1022HP allows the operation of high-speed trunk combining multiple ports and supports fail-over as well. In addition, SNTP, System log and Remote syslog provide alarm event record to the administrator for security monitoring.

Excellent Traffic Control

The PLANET FGSD-1022HP is loaded with powerful traffic management and QoS features to enhance services offered by Service Providers. The functionality includes QoS features such as wire-speed Layer 4 traffic classifiers and bandwidth limiting applications that are particular useful for multi-tenant unit, multi business unit, Telco, or Network Service Provider. It also empowers the enterprises to take full advantages of the limited network resources and guarantees the best performance in VoIP and Video conferencing transmission.

Powerful Management and Easy To Use

For efficient management, the FGSD-1022HP is equipped with console, WEB and SNMP management interfaces. With its built-in Web-Based management interface, the FGSD-1022HP offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the FGSD-1022HP can be accessed via Telnet and the console port. It supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. Moreover, the FGSD-1022HP offers secure remote management by supporting SNMPv3 and SSL connection which encrypts the packet content at each session.

Powerful Security

The PLANET FGSD-1022HP offers comprehensive Access Control List (ACL) for enforcing security to the edge. Its protection mechanism also comprises Port-Based IEEE 802.1x user and device authentication. The Port-security is effective in limiting the numbers of clients pass through so that network administrators can now construct highly secured corporate networks with considerably less time and effort than before.

Flexibility and Extension solution

The two mini-GBIC slots are compatible with 1000Base-SX/LX and WDM SFP (Small Form Factor Pluggable) fiber-optic modules. The distance can be extended from 550 meters (Multi-Mode fiber cable) up to 10/30/50/70/120 kilometers (Single-Mode fiber or WDM fiber cable). They are well suited for applications within the enterprises data centers, distributions or remote PoE equipments data link.

rain Station - IEEE 802.3at compliant IP Surveillance and Wireless powered devices 

Having the capability of IEEE 802.3at Power over Ethernet pre-standard, the FGSD-1022HP can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome cameras, color touch- screen Voice over IP (VoIP) telephones, and multi- channel wireless LAN access points. Besides the wired Internet network, the wireless LAN would be more efficient for the transportation station to provide high-speed and wide area Internet services for travelers. By adopting PoE Wireless LAN structure, the transportation authority gains benefit from less cost while providing better Internet services in wider areas for the travelers. 



IP Office

With the business office expansion, the additional telephones required could be installed in less cost via the implementation of PoE IP Telephony system than that of the traditional circuit wiring telephony system. PLANET FGSD-1022HP PoE Managed Switch helps enterprises to create an integrated data, voice, and powered network. PLANET IEEE 802.3af compliant IP Phones can be installed without the need of an additional power cable because the power can be provided via the standard Ethernet cable from the connected FGSD-1022HP. PoE IP Phones and Analog Telephony Adapter work perfectly with the FGSD-1022HP which injects power through the Ethernet cables.
With the FGSD-1022HP, IP Telephony deployment becomes more reliable and cost effective, which helps enterprises save tremendous cost when upgrading from the traditional telephony system to IP Telephony communications infrastructure. 


Physical Port

 • 8-Port 10/100Base-TX Fast Ethernet ports with IEEE 802.3af / IEEE 802.3at PoE injector
 • 2 10/100/1000Base-T TP combo interfaces
 • 2 mini-GBIC/SFP slots, shared with Port-9 and Port-10
 • Reset button for system management
 • 1 RS-232 male DB9 console interface for Switch basic management and setup

Power over Ethernet

 • Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet End-Span PSE
 • Up to 8 IEEE 802.3af devices powered,supporting PoE Power up to 15.4 Watts for each PoE port
 • Up to 5 IEEE 802.3at devices powered,supporting PoE Power up to 30 Watts for each PoE port
 • Auto detect powered device (PD)
 • Circuit protection prevents power interference between ports
 • Remote power feeding up to 100m
 • PoE Management
  - IEEE 802.3af and IEEE 802.3at mode Switch control
  - Total PoE power budget control
  - Per port PoE function enable/disable
  - PoE Admin-mode control 
  - PoE Port Power feeding priority
  - Per PoE port power limit
  - PD classification detection
  - Over Temperature Protection function
  - Temperature Threshold Control
  - PoE Usage Threshold Control

Layer 2 Features

 • Prevents packet loss Flow Control
  - IEEE 802.3x PAUSE Frame flow control for Full-Duplex mode
  - Back-Pressure Flow Control in Half-Duplex mode
 • High performance of Store-and-Forward architecture, runt/CRC filtering eliminates erroneous packets
     to optimize the network bandwidth
 • Broadcast / Multicast / Unicast storm control
 • 8K MAC address table, automatic source address learning and ageing
 • Supports VLAN
  - IEEE 802.1Q Tag-Based VLAN
  - Port-Based VLAN
  - Q-in-Q tunneling
  - GVRP for dynamic VLAN Management
  - Private VLAN Edge (PVE / Protect Port )
 • Supports Link Aggregation
  - Up to 13 trunk groups
  - Up to 8 ports per trunk group with 1.6Gbps bandwidth (Full Duplex Mode)
  - IEEE 802.3ad LACP (Link Aggregation Control Protocol)
  - Cisco ether-channel (Static Trunk)
 • Spanning Tree Protocol
  - STP, IEEE 802.1D (Classic Spanning Tree Protocol)
  - MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
 • Port Mirroring to monitor the incoming or outgoing traffic on a particular port

Quality of Service

 • 4 priority queues on all Switch ports
 • Traffic classification
  - IEEE 802.1p CoS
  - IP TOS / DSCP to 802.1p priority mapping
  - Port-Based priority
 • Strict priority and Weighted Round Robin (WRR) CoS policies
 • Supports QoS and In/Out bandwidth control on each port 
 • Voice QoS by application source / destination protocol


 • Supports IGMP Snooping v1 and v2
 • IGMP Snooping v2 fast leave
 • Querier mode support


 • IEEE 802.1x Port-Based network access control protocol
 • RADIUS users access authentication
 • L3 / L4 Access Control List (ACL)
 • Source IP-MAC / Port-Binding
 • Port Security for Source MAC address entries filtering


 • Switch Management Interface
  - Telnet Command Line Interface 
  - Web Switch management
  - SNMP v1, v2c, v3 Switch management
  - SSL Switch management
 • Three user privilege levels control (Admin, Operator, viewer)
 • DHCP client for IP address assignment
 • DHCP Option82 and DHCP Relay
 • Link Layer Discovery Protocol (LLDP) for easy network management
 • Built-in Trivial File Transfer Protocol (TFTP) client
 • Firmware upgrade via TFTP or HTTP
 • Configuration restore / backup via TFTP or HTTP
 • Event message logging to local file or remote Syslog server
 • Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)
 • SNMP trap for interface Link Up and Link Down notification
 • Supports Ping function
 • Supports Simple Network Protocol (SNTP)

Hardware Specification

Hardware Version


10/100Mbps Copper Ports

8 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports

1000Mbps Copper Ports

2 10/100/1000Mbps RJ-45 Auto-MDI/MDI-X ports

SFP/mini-GBIC Slots

2 1000Base-SX/LX/BX, shared with Port-9~Port-10

Switch Architecture


Switch Fabric

5.6Gbps / non-blocking

Switch Throughput

4.16Mpps @64Bytes

Address Table

8K entries

Share Data Buffer

2 Mbits

Maximum Frame Size

9K Bytes

Flow Control

Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex 


System: Power
10/100 PoE Port : Link/Activity (Green), PoE In-Use (Amber)
Gigabit Port: 1000 LNK / ACT(Green), 10/100 LNK / ACT(Amber)

Reset Button

< 5 secs: System reboot
> 10 secs: Factory Default

Dimension (W x D x H)

330 x 155 x 43.5 mm



Power Input

100 - 240VAC, 50 - 60Hz, Auto-sensing

Power Consumption

200W / 686.2BTU

Power over Ethernet

PoE Standard

IEEE 802.3af / IEEE 802.3at Power over Ethernet / PSE

PoE Power Supply Type


PoE Power Output

Per Port 56V DC, 350mA . Max. 15.4 Watts (IEEE 802.3af)
Per Port 56V DC, 590mA. Max. 30 Watts (IEEE 802.3at)

Power Pin Assignment

1/2(+), 3/6(-)

PoE Power Budget

150 Watts

Max. number of Class 2 PD


Max. number of Class 3 PD


Max. number of Class 4 PD


Layer 2 Function

Management Interface

Console, Telnet, Web Browser, SSL, SNMPv1, v2c, v3

Port Configuration

Port disable/enable
10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Port Description

Port Status

Display each port’s speed duplex mode, link status and Flow control status 
Auto negotiation status, trunk status

Port Mirroring

TX / RX / Both
1 to 1 monitor

Bandwidth Control

Ingress / Egress Rate Control 
 •Allow to configure per 128Kbps


IEEE 802.1Q Tag-Based VLAN, up to 255 VLANs groups, out of 4041 VLAN IDs
Port-Based VLAN
Q-in-Q tunneling
GVRP for VLAN Management, up to 128 dynamic VLAN entries
Private VLAN Edge (PVE / Protected port) with two protected port groups

Link Aggregation

Static Port Trunk
IEEE 802.3ad LACP (Link Aggregation Control Protocol)
13 groups of 8-Port trunk support


4 priority queue
Traffic classification based on: 
 -Port priority
 -802.1p priority
 -DSCP/TOS field in IP Packet

IGMP Snooping

IGMP (v1/v2) Snooping, up to 256 multicast Groups

Access Control List

IP-Based Layer 3 / Layer 4 ACL
Up to 200 ACL rule entries

802.1X Port Access Control

Supporting EAP-MD5, EAP-TLS and EAP-PEAP authentication types


RFC-2863 Interface MIB
RFC-2665 EtherLike MIB
RFC-1493 Bridge MIB
RFC-2819 RMON MIB (Group 1, 2, 3,9)
RFC-2737 Entity MIB

Standards Conformance

Standards Compliance

IEEE 802.3: 10Base-T
IEEE 802.3u: 100Base-TX
IEEE 802.3z: 1000Base-SX/LX
IEEE 802.3ab: 1000Base-T
IEEE 802.3x: Flow Control and Back pressure
IEEE 802.3ad: Port trunk with LACP
IEEE 802.1D: Spanning Tree Protocol
IEEE 802.1s: Multiple Spanning Tree Protocol
IEEE 802.1p: Class of Service
IEEE 802.1Q: VLAN Tagging
IEEE 802.1x: Port Authentication Network Control
IEEE 802.3af: Power over Ethernet 
IEEE 802.3at: Power over Ethernet (Pre-Standard)
RFC 768: UDP
RFC 791: IP
RFC 854: Telnet
RFC 2068: HTTP
RFC 1112: IGMP version 1
RFC 1157: SNMPv1
RFC 1305: NTP
RFC 1902: SNMPv2c
RFC 2236: IGMP version 2
RFC 2576: SNMPv3
RFC 5424: Syslog



Temperature: 0 ~ 50 Degree C
Relative Humidity: 20 ~ 95%


Temperature: -10 ~ 70 Degree C
Relative Humidity: 20 ~ 95% (non-condensing)


Recently Viewed Items