The Axis Communications T8123-E 30 W Outdoor Midspan (1-Port) offers an easy, fast, and cost-effective solution for powering network video products without the need for additional power supplies or enclosures. This PoE+ midspan can be connected to the mains power; it transforms the power and injects it into the network cable enabling AXIS network video products to receive data and power over the same Ethernet cable.
This high PoE (Power over Ethernet) midspan makes it easier to install network video products in areas where power cabling and outlets are unavailable, thereby reducing installation costs. The midspan is used to power all network devices that are IEEE 802.3at compliant, and can be used with all Axis network video products with built-in PoE support.
The midspan has an IP66-rated RJ-45 connector; the installer does not have to open the outdoor midspan but just connect the mains cable and the network video product. This outdoor-ready midspan is IP66 and NEMA 4X rated, with extended temperature range from -40 to 149°F (-40 to 65°C) at a certain output power.
The AXIS T8123-E also offers surge protection for both AC and PoE ports, thus ensuring that the outdoor equipment is protected from power surges.
- IEEE 802.3at Compliance
- Outdoor-Ready Model
- High PoE (Power over Ethernet)
|Function||Data and power are fed to a network video product through an Ethernet cable|
Use together with a PoE+ splitter for a network video product without built-in PoE support
|Data Rate||10/100/1,000 Mbps|
|Connectors||Shielded rugged RJ-45 (with gasket), EIA 568A, and 568B|
|Power Cable||Pre-installed 9.84' (3 m) shielded cable, pigtail|
|Wiring||Data provided over pairs 1/2 and 3/6 for 10/100 Ethernet, over all 4 pairs for Gigabit Ethernet|
Power over pairs 4/5 (+) and 7/8 (-)
|Output Power||55 VDC (maximum 30 W)|
|Input Power||AC Input Voltage: 100 to 240 VAC|
AC Frequency: 50 to 60 Hz
|Installation & Management||Outdoor ready plug-and-play installation; automatically detects PoE- and PoE+-enabled devices and supplies inline power|
|Casing||Polycarbonate casing; IP66 and NEMA 4X rated|
Color: RAL 9002
|Compliance||RoHS, WEEE, CE, IEEE 802.3at compliant|
|Mounting||Wall and pole mounting|
|Approvals||Emission / Immunity:FCC part 15, Class B with FTP cabling, EN 55022 Class B, EN 55024, EN 61000-4-5 Class 5 (6kV CM), VCCI, ICES-003, KCC, C-tick, CQC|
Safety:UL 60950-1 & UL 60950-22 (UL/cUL), GS Mark, CB, KC, S-mark
Dust and Water Intrusion:IEC 60529 IP66, NEMA 250 Type 4X, ASTM B-117
Surge Protection:Designed to meet GR-1089-CORE lightning protection demands, ITU-T K.20 6 kV on AC lines
|Operating Conditions||Humidity 10 to 100% RH (condensing)|
-40 to 131°F (-40 to 55°C ) at 30 W
-40 to 149°F (-40 to 65°C) at 15.4 W
|Storage||-40 to 185°F (-40 to 85°C)|
Humidity maximum 95% RH (non-condensing)
|Dimensions (H x W x D)||2.8 x 5.9 x 0.9" (70 x 150 x 23 mm)|
|Weight||2.4 lb (1 kg)|