Browse by Brands
Terms & Conditions
Axis Fixed Network Cameras
> Axis Communications M1025 POE Network Camera
Axis Communications M1025 POE Network Camera
Axis Communications M1025 POE Network Camera
Questions about this item? Be the first to ask here.
Add to Cart
Add to Wish List
Email a friend
Axis Part #
The Axis Communications M1025 Network Camera, with a 1/2.7"" progressive scan RGB CMOS sensor, is ideal for recording at small locations. It supports recording 1920 x 1080p using h.264 or M-JPEG compression, and features a microHDMI output (720p) for public display. The 3.6mm lens provides a wide angle of view, and the camera's 2MP resolution supports Digital PTZ, allowing you to digitally pan, tilt, or zoom on the image, without the severe image degradation that that would occur with standard definition cameras.
The camera is ONVIF Profile S compliant, allowing you to use it with other available cameras (not included) as well as ONVIF Profile S compliant NVRs (not included). You can power the camera from the included power supply or by PoE, allowing you to install the camera anywhere you can run an Ethernet cable, without having to worry about an AC power source for the camera. The integrated microSD card slot supports micro SD/microSDHC/microSDXC cards up to 64GB for local recording.
2 MP CMOS Sensor, Fixed 3.6mm f/2.8 Lens
HDTV 1080p with HDMI Output (720p)
Powered from PoE or Power Supply
ONVIF Profile S Compliant
microSD Card Slot
Wide Dynamic Range
A view area is a cropped part of the full view. The view area is treated as a video source in Live View and has its own video stream and PTZ settings
Overlays are used to provide extra information, for example for forensic video analysis or during product installation andconfiguration. Overlays are superimposed over the video stream.
An overlay text can display the current date and time or a text string. When using a text string, modifiers can be used to display information such as the current bit rate or the current frame rate
An overlay image is a static image superimposed over the video stream. The image, for example company logo, is used to provide extra information or to mask a part of the image.
Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused.
Motion detection is used to generate an alarm whenever movement starts or stops in the camera view.
Available action rule triggers and conditions include:
Motion Detection - Trigger the rule when motion is detected.
Tampering - Trigger the rule when tampering is detected.
Network - Trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.
Input Signal- Manual Trigger - Trigger the rule using the Manual Trigger button in the Live View page.
PTZ Moving - Trigger the rule when the camera view moves due to a PTZ operation. This can, for example, be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation. - Preset Reached - Trigger the rule when the camera stops at a preset position.
Storage- Available - Trigger the rule when the storage device is unmounted or removed. This can, for example, be used to send maintenance notifications.
Full - Trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.
Locked - Trigger the rule if the storage device is locked (write protected).
System - System Initializing - Trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.
Time - Recurrence - Trigger the rule periodically. This can, for example, be used to upload an image every 5 minutes.
1/2.7" Progressive scan RGB CMOS
Focal Length: 3.6mm
Aperture: f/2.8 fixed iris
Angle of View
1.5 - 10000 lux, F2.8
1/8 to 1/8000
H.264 Main Profile (MPEG-4 Part 10/AVC), Motion JPEG
1920 x 1080 (HDTV 1080p) to 320 x 240
Frame Rate H.264
25/30 fps with power-line frequency 50/60 Hz
Frame Rate Motion JPEG
15 fps with power-line frequency 50/60 Hz
Multiple, individually-configurable streams in H.264 and Motion JPEG Controllable frame rate and bandwidth VBR/CBR H.264, MJPEG.
Compression, color, brightness, sharpness, contrast, white balance, backlight compensation
Wide dynamic range / dynamic contrast
Rotation: 0°, 90° 180° 270° (only 180° for video stream over HDMI, including CorridorFormat)
Mirroring of images
*Text and image overlay, privacy mask not available in video stream over HDMI
Password protection, IP address filtering, HTTPS encryption*, IEEE 802.1X network access control*, digest authentication, user access log
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (www.openssl.org)
IPv4/v6, HTTP, HTTPS*, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP,SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP,DHCP, ARP, SOCKS
*This product includes software developed by the OpenSSL Project for use in the OpenSSLToolkit (www.openssl.org)
Application Programming Interface
AXIS Video Hosting System (AVHS) with One-Click Camera connection
ONVIF Profile S
AXIS Camera Application Platform
AXIS Media Control SDK, event-trigger data in video stream
Quality of Service (QoS) layer 3, DiffServ Model
Embedded Linux operating system
Video motion detection, active tampering alarm, and support for the AXIS Camera Application Platform, enabling installation of additional applications
Intelligent video, active tampering alarm, edge storage events, AXIS Camera Application Platform enabling installation of additional applications
File upload: FTP, HTTP, network share and email
Notification: email, HTTP and TCP
Pre- and post-alarm video buffering
Video recording to edge storage
Video Access From Web Browser
Camera live view
Video recording to file (ASF)
Customizable HTML pages
Windows Vista, XP, Windows 7, Server 2003 and Server 2008
DirectX 9c or higher
AXIS Camera Management tool on CD and web-based configuration
Firmware upgrades over HTTP or FTP
256 MB RAM
128 MB Flash
DC Input: 4.9 to 5.1 VDC, 2.4W
PoE: Power over Ethernet IEEE 802.3af/IEEE 802.3at Type 1 Class 1 (max. 3.84 W)
Aluminum & Polycarbonate
1 x DC jack
1 x RJ45 10BASE-T/100BASE-TX
1 x micro HDMI (Video out compatible with DVI)
Media Card Slots
1 x microSD/microSDHC/microSDXC
Supports up to 64 GB
32 to 122°F / 0 to 50°C
20 to 80% RH (non-Condensing)
EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024
FCC Part 15 Subpart B Class B, ICES-003 Class B,
VCCI Class B, C-tick CISPR 22,
KCC Class B
Power supply: EN 60950-1, cCSAus
3.7 x 2.3 x 1.7" (95 x 59 x 45 mm)
0.32 lb / 144 g
Was this answer helpful?
[a_helpful] of [a_votes]
Customer(s) found this Answer helpful.
Answer provided by:
No Answers have been submitted yet.
(Submit an answer)
Axis Communications P1354E Day & Night Network Outdoor-Ready Camera
AXIS P8514 Black (Ft. Decal) Covert Network Camera
Axis Communications P1224-E Miniature HDTV Pinhole Network Camera
Axis Communications T93F05 Protective Housing Fixed Camera
Axis Communications Q1615 Barebone Bulk 10pcs 2mp Box Network Camera
Axis Communications P8535 Silver Metric Sensor Unit Height Indicator
Recently Viewed Items
Browse Similar Items
2 MegaPixel Cameras