ACTi E14 - it is a fixed IP-camera in a compact cubic package designed to work in color from light at 0.1 lux . It has a 1/2.3'' CMOS -matrix resolution of 10 megapixels , which allows extremely high-definition capture the situation in the sector or broad enough to ensure efficient operation of specific services such as facial recognition. The model is designed for indoor installation, for example, in large lounges. To work correctly, background lighting function is used to easily extend the dynamic range of up to 62.5 decibels - Basic WDR . It is equipped with optics with a focal length F = 3.6mm mount type CS , which allows to set a different lens. Video is compressed using a codec that supports the formats M - JPEG and H .264 and can be transmitted in two independent streams of resolutions up to 3648 x 2736 and a speed of up to 6 / s . Supported duplex audio, with audio input and output video 3.5 mm jacks. Possible to install flash drive form factor MicroSDHC / MicroSXHC . Food is supported by standard PoE .
IP-camera ACTi E14 is equipped with an interchangeable lens with the parameters f = 3.6mm/F1.8, fixed focus, fixed aperture and mount CS. Picture is formed on the sheltered fixed infrared filter CMOS-matrix size 1/2.3''. Matrix has the highest resolution - 10 megapixels, which allows efficient use of demanding services like picture clarity facial recognition. The model is designed for full-time work in the lighting conditions are not less than 0.1 lux. Used to encode the video codec algorithm supports Motion JPEG and H.264. Broadcast supported double-flow, and for each of the flow parameters are set separately. Maximum flow rate is 6 fps for resolutions 3648x2736, 3648x2160, 2592x1944 and 2048x1536, 30 frames per second for 1920x1080, 1280x720 and 640x480, as well as 15 frames / s for 320x240. The model supports the expansion of dynamic range software Basic WDR to 62.5 dB, masking privacy zones, motion detection in three areas of the frame, private masking, digital noise reduction, and many other features.
IP-camera allows you to maintain a dialogue between the operator and the visitor, which provides full-duplex audio channel with the server. Input and output audio signal is made through a 3.5 mm jack. Used to digitize the signal-channel codec G.711 PCM, 16 bit, 8 kHz.
ACTi E14 has a compact body with the possibility of cubic type mounting on a wall or ceiling with the included bracket. The housing is intended for indoor operation device at a temperature of -10 ° C and a relative humidity of 85%.
IP-camera is integrated into a video surveillance system using its native protocol, or using conventional open protocol ONVIF, allowing you to work with virtually any modern network video surveillance platform. The model is compatible with any specialized software from ACTi, including CCTV ACTi NVR platform and developer tools ACTi SDK. Model supports a single-user mode with saving data to the FTP-server or MicroSDHC / MicroSXHC-memory card and accessed through a user-friendly web-based interface. Web-based interface is fully compatible with the browser MS Internet Explorer 8.0 or later, as well as with other browsers, subject to availability player VLC.
Power supply voltage for IP-camera is supplied through the Ethernet cable technology PoE (IEEE802.3af). The source of this power can serve as a network switch with this technology or injector power supply. The latter may be of a Single-port device as an individual and multi-port panel.
Day / Night mode:
1/5 - 1/2, 000s (manual mode)
1/5 - 1/10, 000s (Auto)
f = 3.6mm/F1.8, CS mount
6 f / s
Connecting to the network:
Ethernet 10/100 Mbit / s
TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour
Alarm input / output:
MicroSDHC / MicroSXHC
PoE Class 2 (IEEE802.3af)
Operating Temperature Range:
-10 º C ~ +50 º C
10% ~ 85%
96mm x 96mm x 45mm