(0) Item Hello, Guest
ACTi D91 1 Mp Indoor Mini Dome Camera with 2.93mm Fixed Lens

ACTi D91 1 Mp Indoor Mini Dome Camera with 2.93mm Fixed Lens

Your Price: $142.00
Retail Price:$151.00
Your Savings:$9.00(6%)
In Stock
Model #:D91

The ACTi D91 1 Mp Indoor Mini Dome Camera comes with a built-in 2.93mm lens that captures clear images of the surveillance area. The lens’ 72° horizontal viewing angle allows coverage of a wide area. The 1/4" progressive scan CMOS sensor ensures clear images even of moving objects and thanks to a minimum illumination of 0.1 lux (F2.0), the camera reproduces crisp detail even in dimly lit areas.

For real time surveillance, this indoor camera supports a maximum frame rate of 30 fps, and ensures no compromise on the image quality by capturing footage in 1280 x 720p. H.264 high profile and MJPEG compressions ensure reduced file sizes, so you can store more footage in a limited storage space, and allow for optimized utilization of network resources.

You can store footage on-board the mini dome camera by inserting a microSDHC card (sold separately) into the provided slot, so no data is lost in case of power or network failure. In addition, the PoE camera can be powered via the network cable itself, eliminating the need for a separate power supply and associated wiring.

1/4" Progressive scan CMOS sensor captures crisp and clear images
Minimum illumination of 0.1 lux at F2.0 for detailed images even in dimly lit areas
Built-in f2.93mm / F2.0 megapixel fixed lens to capture detailed footage
Horizontal viewing angle of 72° ensures coverage of a wide surveillance area
Maximum frame rate of 30 fps at 1280 x 720 resolution for sharp images in real time
Selectable H.264 HP and MJPEG compressions with dual streaming for efficient bandwidth usage
Video motion detection helps save storage space and triggers an alarm when there is any suspicious activity in the monitoring area
Privacy masking in up to 4 zones to hide sensitive areas from view
mircoSDHC card slot for on-board storage and backup
Supports PoE power (power supply sold separately), allowing the camera to be powered via the network cable, eliminating the need for a separate power supply and associated cabling
Product Highlights:
  • 1/4" Progressive Scan CMOS Sensor
  • Minimum Illumination of 0.1 Lux
  • H.264 High Profile, MJPEG Compression
  • Integrated 2.93mm Fixed Lens
  • microSDHC Card Slot for On-Board Storage
  • Privacy Masking
  • Video Motion Detection
  • Powered by PoE Class 1
  • For Indoor Use
Image SensorProgressive scan CMOS
Sensor Size1/4"
Minimum IlluminationColor: 0.1 lux at F2.0 (30 IRE, 2400 K)
Electronic Shutter1/5 to 1/2,000 sec (manual mode); 1/5 to 1/10,000 sec (auto mode)
Focal Length / ApertureFixed focal, f2.93 mm / F2.0
Mount TypeBoard
Horizontal Viewing Angle72°
Viewing Angle AdjustmentPan: ±90°; Tilt: 0 to 90°
CompressionH.264 HP, MJPEG
Maximum Frame Rate vs. Resolution30 fps at 1280 x 720
30 fps at 640 x 480
Multi-StreamingSimultaneous dual streams based on 2 configurations
Bit Rate28 kb/s to 6 Mb/s (per stream)
Bit Rate ModeConstant, variable
Image EnhancementWhite Balance: Automatic, hold, and manual
Sharpness (auto)
Auto Gain Control
Digital Noise Reduction
Privacy Mask Type4 configurable regions
Text OverlayUser-defined text on video
Image OrientationFlip and mirror
Ethernet Port1, Ethernet (10/100 Base-T), RJ-45 connector
SecurityIP address filtering; HTTPS encryption; Password protected user levels; Anonymous login; IEEE 802.1X network access control
Alarm TriggersVideo motion detection (3 regions)
Alarm ResponseNotify control center
Change camera settings
Command other devices
E-mail notification with snapshots
Save video or snapshot to local storage
Upload video, snapshot to FTP
Local StoragemicroSDHC memory card slot (card not included)
Unified SolutionFully compatible with ACTi software
ISV IntegrationSoftware Development Kit (SDK) available (sold separately), ONVIF compliant
Firmware Access BrowserMicrosoft Internet Explorer 8.0 or newer versions (full functionality)
Other browsers with VLC installed (partial functionality)
Power Source and ConsumptionPoE Class 1 (IEEE802.3af) / 2.43 W
ApprovalsCE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B)
Mount TypeSurface
Starting Temperature14 to 104°F (-10 to 40°C)
Operating Temperature14 to 104°F (-10 to 40°C)
Operating Humidity10 to 85% RH
Dimensions (Ø x H)4.3 x 2.3" (110.0 x 58.0 mm)
Weight0.443 lb (0.201 kg)

Recently Viewed Items